Drivers from TaylorMade
TaylorMade R9 TP Drivers
Made in 2009. The only difference between the R9 and the R9 TP is shaft options. The R9 was available with a Fujikura Motore 65 shaft, while the R9 TP was available with an Aldila (Voodoo NV6 or VS6), Fujikura (Motore 65, 75 or 85), Matrix (XCON 5 or HD6) or Mitsubishi Rayon (Fubuki 63 or 73) shaft. The heads are identical.
TaylorMade 2009 Burner Drivers
Dual Crown technology lowers the CG (center of gravity) location, creating hihg launch and low spin. TaylorMade's Inverted cone technology delivers a super-stable, high MOI (moment of inertia) clubhead design for increased forgiveness on off-center hits, sending them longer and straighter. SuperFast shaft enables explosive swing speed for even more blazing distance.
TaylorMade R9 Drivers
Made in 2009. The TaylorMade R9 driver is TaylorMade's highly anticipated follow up to the highly successful r7 line of drivers. Outfitted with TaylorMade’s Flight Control Technology (FCT), the R9 allows users to easily and conveniently change the face angle, loft, and lie at their own convenience. In addition, the R9 features Movable Weight Technology (MWT) that allows users to change the club...
TaylorMade Burner 2009 TP Drivers
Has a more open clubface and a higher center of gravity for a more penetrating trajectory and shot-shaping capability.
TaylorMade Burner 460 - 2007 Drivers
Made in 2007. TaylorMade's Burner 460, with it's SuperFast club technology, promotes a faster swing for added drive-crushing power! Bullet shaped clubhead and sleek crown markings provide increased confidence and speed at address while TaylorMade's 'Inverted Cone Technology' and 460cc head size give the 460 Burner a tremendous amount of forgiveness for long, straight results on off-center hits.
TaylorMade Tour Burner Drivers
Made in 2008. The driver has a 450cc head with a dual crown that has a small, thin top and a large, weighted power-base that provides a low center of gravity for tour-caliber spin, creating maximum distances at higher swing speeds.
TaylorMade Tour Burner TP Drivers
Made in 2008. The driver has a 450cc head with a dual crown that has a small, thin top and a large, weighted power-base that provides a low center of gravity for tour-caliber spin, creating maximum distances at higher swing speeds.
TaylorMade r5 Dual Drivers
Introduced in 2005. The r5 dual features widely spaced, dual TaylorMade Launch control (TLC) cartridges that are pre-configured and permanent.
TaylorMade r7 Limited Drivers
Made in 2008-2009. The Taylor Made r7 Limited driver features a 440cc titanium head with Taylor Made's Movable Weight Technology.
TaylorMade r7 quad Drivers
Introduced in 2004. The R7 Quad introduced TaylorMade's Launch Control Technology (TLC). The Titanium clubhead is 400cc.
TaylorMade r7 SuperQuad TP Drivers
Made in 2007. The Superquad TP has six movable weights in four ports that allow 102 CG locations, 18 at standard swingweight. (Includes two 1g, two 12g, one 10g and one 14g weights). 460cc.
TaylorMade r7 425 Drivers
Introduced in 2005. The TaylorMade r7 Quad 425 driver offers a broader scope of performance possibilities than the original r7 Quad driver, with the ability to steer the ball higher, longer, and straighter than the earlier model.
TaylorMade r7 460 Drivers
Introduced in 2006. The r7 460 has a 460cc club head (max size allowed by the USGA) making this driver extremely forgiving & easy to launch.
TaylorMade r7 SuperQuad Drivers
Made in 2007. An exceptionally low and deep CG (center of gravity) and massive clubface area makes the TaylorMade r7 Superquad driver exceptionally easy to launch on a high, strong trajectory for long carry and phenomenal distance.
TaylorMade R580 Drivers
Made in 2002. Features a 400cc titanium head with a Tuned Weight Cartridge in the back, which optimizes head/shaft performance individually in each driver.
TaylorMade r7 460 TP Drivers
The TaylorMade r7 460 TP features an extra-large, 460cc clubhead that has the highest MOI of any TaylorMade driver.
TaylorMade r7 425 TP Drivers
Introduced in 2005. The r7 425 TP is engineered with a slightly open clubface. Includes more cartridges in a wider range of weights. Equipped with a different shaft, the TaylorMade RE*AX with Fujikura ROMBAX technology.
TaylorMade r7 CGB MAX Drivers
460 cc clubhead combined with TaylorMade's Inverted Cone Technology produces an extremely-high effective MOI (eMOI*) that exceeds 5800 (USGA conforming).
TaylorMade r9 Drivers
The TaylorMade R9 driver is virtually 24 drivers in one that features Flight Control Technology (FCT) and Movable Weight Technology (MWT) to create complete adjustability for maximum flight control and up to 75 yards of side-to-side adjustability. With FCT, the player may adjust the face angle, the lie angle and effective loft by simple shaft/head adjustments with 8 different clubhead positions to...
TaylorMade Burner 460 TP Drivers
Made in 2007. Classically-shaped clubhead with its distinctive "TaylorMade Tour" appearance at address promotes increased confidence and control. Extra large 460cc clubhead with inverted cone technology gives you long, straight drives on off-center hits. TaylorMade RE*AX TP shaft increases head stability at impact @ tour level swing speeds.
TaylorMade r7 Draw Drivers
Made in 2006. Advanced 460 cc titanium clubhead design provides super-high MOI for tremendous power and forgiveness. Draw-Weighted Technology concentrates weight in the back heel area, encouraging faster clubface rotation through impact to promote a draw. RE*AX 55-gram soft-tipped graphite shaft feels great and promotes a high launch angle and right-to-left flight.
TaylorMade r7 Limited TP Drivers
Made in 2008. The TP version sets up 1-degree open and has a higher center of gravity for greater shot-shaping ability and a more penetrating trajectory.
TaylorMade Burner 460 Draw - 2007 Drivers
Made in 2007. Promotes faster speed and a right-to-left ball flight for longer distance.
TaylorMade R510 Drivers
Made in 2002. 330cc deep face design for players who want low trajectory, low spin drives and more directional control.
TaylorMade R510 TP Drivers
Introduced in 2002, but popular among serious golfers for several years. At 390cc, the R510 TP is 60cc larger than the R510.
TaylorMade R580 XD Drivers
Made in 2003. Substantial 440cc head that fuels massive MOI for greater forgiveness.
TaylorMade r7 quad HT Drivers
Made in 2005. The r7 quad (high trajectory) has a shallower and longer clubface and a deeper body for an even father back CG, resulting in a higher ballflight and a five-percent greater MOI.
TaylorMade 300 Ti Drivers
Introduced in 2000. Features deep-face design preferred by low trajectory, high-skill players · center of gravity placed to enhance shot workability and create a penetrating trajectory.
TaylorMade 320 Ti Drivers
From 2000. A mid-size profile for confidence at address and a greater sweet spot · Power Band™ crown alignment creates greater impact efficiency and increases alignment and shot consistency · center of gravity positioned on vertical and horizontal axis to promote mid-height trajectory.
TaylorMade 360 Ti Drivers
Produced in 2000. Providing confidence at address for all players, Taylor Made's 360 Ti Custom driver for men promotes the highest legal USGA ball speeds and features a long 46-in club length to help expand your swing arc for more power.
TaylorMade Burner Bubble Drivers
Produced from 1995 - 1998. Features the bubble graphite shaft.
TaylorMade Firesole Drivers
Produced in 1999. TaylorMade put the tungsten where it can have the biggest impact: directly behind the sweetspot, in the form of a center-oriented high density sole weight plug.
TaylorMade R360 XD Drivers
Made in 2003. With an expansive 360cc clubhead size, the R360XD boasts a high "moment of inertia" for greater stability and less twisting on off-center hits. This means that mis-hits will be more likely to find the fairway.
TaylorMade R540 Drivers
The Taylor Made R540 driver features a 350cc titanium head with a Tuned Weight Cartridge in the back, which optimizes head/shaft performance individually in each driver.
TaylorMade R540 XD Drivers
Introduced in 2003. Longer, deeper clubface than the original R540: The R540XD boasts a total clubface area of 35.56 square centimeters, and a generous 21.22 square centimeters of clubface area above the CG.
TaylorMade r7 TP Drivers
Made in 2005. Features an upgraded shaft over the r7 and more adjustable weight options.
TaylorMade Titanium Bubble Drivers
Made from 1995 to 1998. First titanium driver from TaylorMade. Endorsed by Tom Lehman.
Our sponsors